Tutorial
f
For further information on optimizing C2H Compiler results, refer to the
Accelerating Nios II Systems with the C2H Compiler Tutorial .
Observe the Accelerator in SOPC Builder
After the C2H Compiler adds the hardware accelerator to your SOPC
Builder system, the accelerator appears in SOPC Builder.
To look at the newly-added accelerator in your SOPC Builder system,
perform the following steps:
1.
2.
3.
4.
1
c
Return to the Quartus II window.
On the Tools menu click SOPC Builder... to open SOPC Builder.
On the System Contents tab in SOPC Builder, notice the new
component accelerator_c2h_tutorial_sw_do_dma , located at the
bottom of the table of active components.
Close SOPC Builder.
You cannot modify the accelerator from within SOPC Builder.
You must use the Nios II IDE interface to remove or alter it.
Close SOPC Builder while building projects in the Nios II IDE
with the C2H Compiler. The C2H Compiler modifies the SOPC
Builder system in the background. If SOPC Builder is open
while you build a Nios II IDE project with C2H accelerators, the
system displayed in the SOPC Builder window can become out-
of-date.
If you inadvertently leave SOPC Builder open while building an
accelerator with the C2H Compiler, be sure to close the SOPC
Builder system file without saving it. If you save the out-of-date
file, you overwrite your accelerator-enhanced system file.
Run the Project with the Accelerator
You are now ready to run the accelerated project. Perform the following
steps:
1.
2.
Return to the Quartus II window, if it is not already open.
Configure the FPGA with the new .sof file that contains the
accelerator.
2–14
Nios II C2H Compiler User Guide
9.1
Altera Corporation
November 2009
相关PDF资料
IPTR-DSPBUILDER DSP BUILDER SOFTWARE
IR11662SPBF IC CNTROL SMART RECTIFIER 8-SOIC
IR1166STRPBF IC MOSFET DRIVER N-CH 200V 8SOIC
IR11672ASPBF IC MOSFET DRIVER 200V 8-SOIC
IR1167ASTRPBF IC SMART SECONDARY DRIVER 8-SOIC
IR11682STRPBF IC MOSFET DRIVER DUAL 200V 8SOIC
IR1168SPBF IC MOSFET DRIVER DUAL 200V 8SOIC
IR1176STR IC DRIVER RECT SYNC 5V 4A 20SSOP
相关代理商/技术参数
IPT-DSPBUILDER 功能描述:开发软件 DSP Builder MATLAB SIMULINK RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPTE-75GF-1000-70D 制造商: 功能描述: 制造商:undefined 功能描述:
IPTG06A18-11SZC 制造商:GLENAIR 制造商全称:Glenair, Inc. 功能描述:Straight Plug Connector with Backshell to Accommodate
IPTG06A18-11SZCPH16 制造商:GLENAIR 制造商全称:Glenair, Inc. 功能描述:Straight Plug Connector
IPTG06A18-11SZCPHM18 制造商:GLENAIR 制造商全称:Glenair, Inc. 功能描述:Straight Plug Connector
IPTG06A18-11SZCSR 制造商:GLENAIR 制造商全称:Glenair, Inc. 功能描述:Straight Plug Connector
IPTG06ASE18-11SZ 制造商:GLENAIR 制造商全称:Glenair, Inc. 功能描述:Straight Plug Connector
IPTG06E18-11SZC 制造商:GLENAIR 制造商全称:Glenair, Inc. 功能描述:Straight Plug Connector